16" Invisible Separating Zipper, Size #5, Bias Bespoke Brand
- $4.95 / Piece
Size #5 invisible zippers that completely separate so that they can be set into cardigans and other garments and accessories that need to come completely open. These zippers are our Bias Bespoke brand (a small "BIAS" is engraved into the puller) and are durable and look great. The coil teeth are invisible on the front side, and about 6.5mm wide (1/4") on the back when closed. The tape has a total width of 30mm (1 3/16"). They're easily shortened from the top of the zipper.
We also sell these zippers in 18", 20", and 22" lengths, and in different colors in 7", 9", and 11".
Please read instructions for setting in invisible separating zippers in the tab below, or find them as a graphic in the pictures to the left. (Use the magnifying glass to see the whole image at once.)
Quantity Pricing on this item is regardless of color. So for example, 12 zippers in one color or one zipper of 12 different colors are both eligible for a quantity discount.
Orders placed before 2pm on a weekday will be shipped the same day. Orders placed after 2pm will shipped on the following business day, excluding holidays.
Materials sold by the yard are not returnable. All other items can be returned in original condition within 30 days for a full refund of the cost of the item. Shipping costs are not refundable and buyers must pay return shipping costs.
For more information see the Returns & Shipping page.
1. Completely separate the zipper so that you have two unconnected parts.
On the Size #4 separating invisible zippers, the slider and box stay attached to the Right Side of the zipper, whereas on the Size #5 separating invisible zippers, the slider and box stay attached to the Left Side of the zipper.
Sew the side without the slider and box first, staying about 1mm width away from the teeth, especially near the bottom. (If you're too close to the teeth at the bottom, it will be very hard to open the zipper.)
2. On the other side of the zipper, move the slider and box upward to around the middle of the zipper. Sew about half of the zipper, and then lift the sewing foot up and move the slider and box back down into the part of the zipper already sewn. Continue stitching all the way to the end.
3. Put the pin into the slider and box and join the zipper and check your work. It is done!
The color of the items you receive may vary slightly from the way they appear here. We strive to present images whose colors match the actual items as much as possible, however, colors are affected by the settings of the monitor they're viewed on, so differences are unavoidable in some cases. There may also be differences in dye lots or finishes.
*Some items with the same color name may be in different dye lots across items, so please purchase a small quantity first or check with us for more info.*
For accurate color matching, see the info on our Terms & Conditions page.
|1-2||$4.95 / Piece|
|3-11||$4.20 / Piece||save 15%|
|12+||$3.20 / Piece||save 35%|